When you create a new hosting package in WHM, cPanel uses a default bandwidth limit if you don't specify one. This guide shows you how to set that default value via WHM Tweak Settings.
Step 1: Log in to WHM
Open your browser and navigate to https://your-server:2087. Enter your root credentials to log in.
Step 2: Navigate to Tweak Settings
In the left-hand menu, go to Home » Server Configuration » Tweak Settings.
Step 3: Find the Bandwidth Setting
Use the search bar at the top of the Tweak Settings page and type bandwidth. Look for the option labelled Default bandwidth limit for new packages.
This setting defines the default monthly bandwidth (in megabytes) assigned to any new cPanel package you create.
Step 4: Set the Default Value
Enter the desired bandwidth value in Megabytes (MB). For example:
1024— 1 GB monthly bandwidth10240— 10 GB monthly bandwidthUnlimited— No bandwidth restriction (if supported)
Step 5: Save Changes
Scroll to the bottom of the page and click Save.
Important Notes
- This setting only applies to new packages. Existing packages will not be affected.
- You can still override the default value when creating individual packages.
- Enter
0orunlimitedto set unlimited bandwidth by default. - Changes take effect immediately for new packages created after saving.
Troubleshooting
- Cannot find the option: Use the search/filter bar at the top of Tweak Settings to locate it quickly.
- New packages still show old value: Verify the package was created after you saved the setting. Pre-existing packages retain their original limits.
- Bandwidth limit not enforced: Ensure that bandwidth limiting is enabled in Home » Server Configuration » Tweak Settings.
